新闻资讯

NEWS

  • 彩盒的生产流程
  • 本站编辑:海宁鼎烨彩印包装有限公司发布日期:2019-10-22 18:48 浏览次数:

1.设计

这个阶段主要是由您与设计师及印刷厂来协调完成,由您按照自己的要求与广告公司,或者自己内部的设计人员,设计好包装印刷文件,并同时完成包装材料的选定。

2.

我们按,纸张的大小、厚薄,印刷的颜色确定印刷。

3.制作刀模及裱坑

制作刀模需按照样板和印刷出来的半成品来确定,一个好的刀模

刀模模决定了彩盒的外观形状,裱坑主要应用在坑盒上,按照您的要求选择坑纸用专门的机械粘在一起。

4.印刷品外观处理

这个外观处理主要是对表面进行美化,有覆膜,烫金,UV,过油磨光等。

5.成型

使用机械,刀模。使彩盒模切,形成彩盒的基本样式。

6.粘盒

就是把彩盒按照样板或设计样式,把彩盒需固定连接的部位用胶水粘起来。

2-160329202258[1].jpg

1. Design
This stage is mainly coordinated by you and the designer and the printing factory. First, you design the packaging printing documents according to your own requirements, or your own internal designer, and complete the selection of packaging materials at the same time.
2.
We press the size of the paper, thick and thin, the color of the printing to determine the printing.
3. Making knife moulds and pits
To make a knife mold, you must determine it according to the template and the printed semi-finished product. A good knife mold
The die pattern determines the appearance of the color box. The mounted pit is mainly used in the pit box. According to your requirements, the pit paper is selected to be glued together with a special machine.
4. Print Appearance Processing
This exterior treatment is mainly to beautify the surface, there is a film, gilding, UV, over-oil polishing and so on.
5. Forming
Use mechanical, die. Make the color box die-cut to form the basic style of the color box.
6. Sticky Box
It is to glue the color box according to the pattern or design, and glue the part of the color box that needs to be fixed.


  • 联系我们
  • 海宁鼎烨彩印包装有限公司
  • 地址:海宁市长安镇(农发区)启潮路109号
  • 电话:13957168121
  • 传真:0571-86017289
  • 联系人:吴经理
  • 邮箱:20072259@qq.com